Tank Lining PFA for Electronic Chemicals

Tanks and Container Lining PTFE processing range and characteristics:

1. Fluoropolymer Lining Material: polytetrafluoroethylene ( PTFE , F4), ETFE (F40), PVDF, PFA, ECTFE, FEP, etc.

2. structure: various types of tower sections, containers, reactors, storage tanks, etc., non-standard containers can be processed according to user drawings.

3.Fluoropolymer lining material and thickness: lining material PTFE (ptfe, f4) thickness of 2 ~ 3mm, lining material ETFE (f40) thickness of 2 ~ 3mm.

4. Fluoropolymer lining features: RANA has mature Fluoropolymer board lining, three-dimensional fluoropolymer Rotolining method, spray coating and Fluoropolymer Injection Molding processes, according to the user's drawings requirements to produce any specifications of the lining PTFE (F4) anti-corrosion equipment, vertical, horizontal Not limited to, the branch pipe can be opened at any position, the length of the branch pipe is 100mm;

5. The upper and bottom heads are separated from the cylinder by a sheet lining. The head and the end cover are generally flat, butterfly or tapered, and standard heads can also be used. The maximum depth (h) of the butterfly head is one tenth of the diameter of the head.

6. The inner wall of the equipment steel shell should be smooth and glossy, the flare R angle of the equipment flange is 6-10mm, and the flare R angle of the branch pipe and the flange is 3-5mm;

 7. Lining manufacturing standards: Chinese standard HG20536-93.