Molded Eccentric Head Size Shaped Elbow
You are here: Home » Products » PTFE Molding Equipment » Molded Eccentric Head Size Shaped Elbow
Share to:

Molded Eccentric Head Size Shaped Elbow

Melt molding lining (PFA/FEP) : make a special mold, heat the lining materials and artifacts together, make the lining material melt, again to the external force, make the lining layer coated on the surface of the liner. Is suitable for the production of various kinds of valve and piping components. 
Quantity:

Shaped elbow - Molded eccentric head size 


Melt molding lining (PFA/FEP) : make a special mold, heat the lining materials and artifacts together, make the lining material melt, again to the external force, make the lining layer coated on the surface of the liner. Is suitable for the production of various kinds of valve and piping components. 


Product performance and specifications: 
1) the next forming molten state, small internal stress, no welded seam. 
2) lining thicker, up to 3 ~ 8 mm, resistant to a certain temperature under negative pressure. 
3) suitable for small batch production complex workpiece, high dimensional accuracy, good surface quality. 
4) can be used in the industry with ultra-pure requirements. 
5) good resistance to permeability. 
6) use the temperature: - 100 ~ 230 ℃ the lining (PFA), 100 ~ 200 ℃ lining (FEP). 
7) size specifications: DN25 ~ 500 mm. 
8) using pressure: 0.09 ~ + 1.6 Mpa 

Molded Eccentric Head Size Shaped Elbow 1PTFE push (squeeze) pressure pipe line straight tube 


Manufacturing process: first, using imported PTFE, PFA, FEP, PVDF powder, push (squeeze) pressure into the pipe, then it forcibly dragged into the seamless steel tube (slightly bigger than the steel liner tube diameter 1.5 2 mm diameter), forming no clearance lining. , in order to eliminate stress, put it in a furnace, heating temperature 230 ℃, make it adapt to used in the temperature under 230 ℃. At the same time push (squeeze) pressure tube of the axial tensile strength is better than coil tube obviously. This pipe is ideal of positive and negative pressure resistance ability.


Professional as one of the leading PTFE equipment manufacturers and suppliers in China, we now bring you a large selection of molded eccentric head size shaped elbow from our professional factory. Welcome to buy or wholesale the famous brands' equipment with us, and the customized product is also available.


Product Inquiry
Jiangsu Ruineng anticorrosion equipment Co., Ltd. is specialized in producing various types of lined PTFE storage tanks, ISO tanks and various types of lining anticorrosion equipment.

Contact Us

ADD : No. 369 South Renmin Road, Jiangyan District ,Taizhou City, Jiangsu Province, China 

TELL: 86-523-88129878

webchat: ronacen

M/P: 86-18061038567
 
Fax: 86-523-88919980

EMAIL : ronacen@yeah.net
Copyright 2021@Jiangsu Ruineng anticorrosion equipment Co., Ltd.